A cold mirror
[i=s] 本帖最后由 zkyioe 于 2017-7-28 22:27 编辑 A cold mirror reflects short wavelengths and transmits long wavelengths. The are many applications for this type of coating. In this example, we req...
[i=s] 本帖最后由 zkyioe 于 2017-7-28 22:27 编辑

A cold mirror reflects short wavelengths and transmits long wavelengths. The are many applications for this type of coating. In this example, we require that the coating consist of layers of SiO2 and TiO2 on a glass substrate and have the following performance at normal incidence:

> 90% reflectance for 380-750 nm
< 10% reflectance for 800-1000 nm

In TFCalc it is very easy to enter these requirements using continuous targets. We will use TFCalc's needle/tunneling optimization to design the coating from "scratch". That is, we will begin the design process with a single thin layer of TiO2 and allow TFCalc to increase the thickness and number of layers in the design. TFCalc finds a design in a few minutes. After we remove two thin layers and reoptimize the design, an acceptable 21-layer design is found:

The prime difficulty with this type of coating is the design of the reflector. After an acceptable reflector has been designed, it is usually easy to extend the transmitting region. For instance, the plot below shows the 21-layer design extended to 2000 nm.
  1  2  下页

验证码:        
版块示例
版块示例
版块示例
版块示例
© 2021 光学薄膜信息网    设置底部链接
Powered by DIY-Page 8.3